SZ05-L-PRO-3 zigbee module
First, product introduction
The SZ05-L-PRO-3 wireless data transmission module adopts TI solution chip, which is an RF transceiver and microprocessor conforming to the international standard of zigbee pro. It has long communication distance, ultra low power consumption, strong anti-interference ability and flexible networking. Stability and other advantages; can achieve transparent transmission of data between devices between point-to-multipoint and multi-point to multi-point; practical MESH networking mode. The modules are divided into coordinators, routers and terminal nodes. These three types of devices have different network functions. The coordinator is the central node of the network, responsible for the originating organization, network maintenance and management functions of the network; the router is responsible for data relay and forwarding and network. Maintenance function; the terminal node only sends and receives data of this node.
Second, product performance parameters
Specification model |
|||
SZ05-L |
-XXX |
-XXX |
-X |
Product Series |
Transmission distance |
Data interface |
Antenna specification |
SZ05-L |
-PRO-3(meters) |
-TTL |
-PCB(Built-in antenna) |
For example: Model SZ05-L-PRO-3-TTL-PCB, which means SZ05-L series wireless data transmission module, open space transmission distance is 800 meters, TTL interface, built-in PCB antenna. |
Performance characteristics |
|||
Powerful |
Full-featured module with central, relay routing, and terminal capabilities |
Send mode |
Broadcast transmission, fixed target or protocol type transmission mode optional |
Communication distance |
Maximum line of sight transmission distance of 800 meters |
Node type |
Central node, routing node, and terminal node can be set arbitrarily |
Strong anti-interference ability |
2.4G DSSS Spread Spectrum Technology |
Networking capability |
Star network, peer-to-peer network, mesh network |
Serial port application |
Transparent mode or command format transmission, the highest baud rate is 115200 |
Network capacity |
16 channels are optional, 65535 network IDs can be set arbitrarily |
The main function |
Serial to wireless, wireless data transmission |
Technical Parameters |
|||
Radio frequency |
2400-2485M 2.4G ISM free frequency band |
Location information |
RSSI |
Wireless rate |
Fixed 250K |
Input voltage |
DC 3.7V~5V |
Serial port rate |
Baud rate 1200-115200 can be set |
Sleep current |
80UA (with ldo, remove LDO can be lower) |
Modulation |
DSSS direct sequence spread spectrum |
Transmit power |
20dbm |
Channel mode |
16 channels (interval 5M) |
Receiving sensitivity |
-104dbm |
Channel detection |
CSMA/CA |
Interface Type |
TTL、IO |
Network structure |
Star, peer, mesh (MESH) |
Equipment antenna |
2.4G built-in PCB antenna |
Network ID |
65535 can be specified |
Send mode |
Transparent transfer or instruction format |
Node type |
Central node, routing node, and terminal node can be set |
Operating temperature |
-40℃~+85℃ |
IO application |
12 IO ports can be expanded to support switch acquisition, high and low point flat output, analog acquisition, PWM, DS18B20 temperature acquisition, dht21 temperature and humidity acquisition, etc. |
Special Instructions |
This product is too small in size and has no connector pins. It is recommended that customers purchase a special SZ05-L connector backplane. |
SZ05-L-PRO-3 Zigbee模块产品手册 V1.0 |
2018-04-20 |
Shuncom News
Customer Service
TEL:021-33933988
FAX:021-33933968-6808
Mail:sales@shuncom.com
Complaints & Claim:18918151980
Address: Building 1, No.88 Shengrong Road, Zhangjiang, Pudong, Shanghai
Smart Solutions
IoT Products